| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374 |
- /****************************************************************
- ****************************************************************
- ** **
- ** (C)Copyright 2008-2009, American Megatrends Inc. **
- ** **
- ** All Rights Reserved. **
- ** **
- ** Suite 200, 5555 oakbrook pkwy, Norcross **
- ** **
- ** Georgia - 30093, USA. Phone-(770)-246-8600. **
- ** **
- ****************************************************************
- ****************************************************************
- *****************************************************************
- *
- * IPMI_GroupExtn.h
- * IPMI Group Extension Application Command numbers
- *
- * Author: Rama Bisa <ramab@ami.com>
- *
- *****************************************************************/
- /*** Group Extension (NetFn Pair 0x2C/0x2D) Specific Commands ***/
- /*** SSI Compute Blade Specific Commands ***/
- #define CMD_SSICB_GET_COMPUTE_BLADE_PROPERTIES 0x00
- #define CMD_SSICB_GET_ADDR_INFO 0x01
- #define CMD_SSICB_PLATFORM_EVENT_MESSAGE 0x02
- #define CMD_SSICB_MODULE_BMI_CONTROL 0x03
- #define CMD_SSICB_MODULE_PAYLOAD_CONTROL 0x04
- #define CMD_SSICB_SET_SYSTEM_EVENT_LOG_POLICY 0x05
- #define CMD_SSICB_SET_MODULE_ACTIVATION_POLICY 0x0A
- #define CMD_SSICB_GET_MODULE_ACTIVATION_POLICY 0x0B
- #define CMD_SSICB_SET_MODULE_ACTIVATION 0x0C
- #define CMD_SSICB_SET_POWER_LEVEL 0x11
- #define CMD_SSICB_GET_POWER_LEVEL 0x12
- #define CMD_SSICB_RENEGOTIATE_POWER 0x13
- #define CMD_SSICB_GET_SERVICE_INFO 0x16
- #define CMD_SSICB_GET_APPLET_PACKAGE_URI 0x17
- #define CMD_SSICB_GET_SERVICE_ENABLE_STATE 0x18
- #define CMD_SSICB_SET_SERVICE_ENABLE_STATE 0x19
- #define CMD_SSICB_SET_SERVICE_TICKET 0x20
- #define CMD_SSICB_STOP_SERVICE_SESSION 0x21
- /*** DCMI Specific Commands ***/
- #define CMD_GET_DCMI_CAPABILITY_INFO 0x01
- #define CMD_GET_POWER_READING 0x02
- #define CMD_GET_POWER_LIMIT 0x03
- #define CMD_SET_POWER_LIMIT 0x04
- #define CMD_ACTIVATE_POWER_LIMIT 0x05
- #define CMD_GET_ASSET_TAG 0x06
- #define CMD_GET_DCMI_SENSOR_INFO 0x07
- #define CMD_SET_ASSET_TAG 0x08
- #define CMD_GET_MANAGEMENT_CONTROLLER_ID_STRING 0x09
- #define CMD_SET_MANAGEMENT_CONTROLLER_ID_STRING 0x0A
- #define CMD_SET_THERMAL_LIMIT 0x0B
- #define CMD_GET_THERMAL_LIMIT 0x0C
- #define CMD_GET_TEMPERATURE_READING 0x10
- #define CMD_SET_DCMI_CONF_PARAMS 0x12
- #define CMD_GET_DCMI_CONF_PARAMS 0x13
- /*** HPM Specific Commands ***/
- #define CMD_GET_TARGET_UPLD_CAPABLITIES 0x2E
- #define CMD_GET_COMPONENT_PROPERTIES 0x2F
- #define CMD_ABORT_FIRMWARE_UPGRADE 0x30
- #define CMD_INITIATE_UPG_ACTION 0x31
- #define CMD_UPLOAD_FIRMWARE_BLOCK 0x32
- #define CMD_FINISH_FIRMWARE_UPLOAD 0x33
- #define CMD_GET_UPGRADE_STATUS 0x34
- #define CMD_ACTIVATE_FIRMWARE 0x35
- #define CMD_QUERY_SELF_TEST_RESULTS 0x36
- #define CMD_QUERY_ROLLBACK_STATUS 0x37
- #define CMD_INITIATE_MANUAL_ROLLBACK 0x38
|
