/*
 * config sensor sdr in here.
 * Author:Jimbo
 */

#include <stdio.h>
#include <stdint.h>
#include "com_IPMI_SDRRecord.h"

/*
 * sdr table
 */
const MgmtCtrlrDevLocator_T bmc_sdr = {
		/* SDR Record Header */
		{
			0x01,	//Record ID
			0x51,	//SDR Version
			MGMT_CTRL_DEV_LOCATOR_SDR_REC,	//Record Type
			11+MAX_ID_STR_LEN,	//Record Length = 11+string length
		},
		/* Record Key Bytes*/            
		0x20,                        /* Slave address - 0x20 Primary BMC */
		0x00,                        /* ChannelNumber - 0x00 Primary BMC */
											
		/* Record Body Bytes*/
		0x0,       /* power state notification         */
		0xff,       /* Device Capablities               */
		{0,    0,   0,},                          /* RESERVED                         */
		0x0,                   /* Entity ID                        */
		0x1,                 /* Entity Instance                  */
		0x0,                      /* OEM                              */
		0xc0 +MAX_ID_STR_LEN,   /* ID String Type / Length Code     */
		"STM32F429_BMC"
	};
 
	
/***************** Attation ************************
* <Record ID>,	<Sensor Number>  must be modified!!!
**************************************************/
	
const FullSensorRec_T full_sdr_tbl[] = {
/*
 * sensor number: 1
 * sensor name:	ltc2990_Temp
 * brief:	ltc2990 internal temperature
 */
	{
		/* SDR Record Header */
		{
			0x02,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x01,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_Temp"
	},

/*
 * sensor number: 2
 * sensor name:	ltc2990_VCC
 * brief:	ltc2990 supply
 */
	{
		/* SDR Record Header */
		{
			0x03,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x02,	//Sensor Number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x4,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		195,	//M_LSB  			=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		25,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x3&0x0F),		//R exponent,B exponent === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x00,	//Lower Non-Recoverable Threshold
		0x00,	//Lower Critical Threshold
		0x00,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_VCC"
	},
/*
 * sensor number: 3
 * sensor name:	ltc2990_V1_+5V
 * brief:	ltc2990 V1
 */
	{
		/* SDR Record Header */
		{
			0x04,	//Record ID 				=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x03,	//Sensor Number 				=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x5,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		391&0xff,	//M_LSB 				=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((391>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent  === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x0,	//Lower Non-Recoverable Threshold
		0x0,	//Lower Critical Threshold
		0x0,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_V1_+5V"
	},
	
/*
 * sensor number: 4
 * sensor name:	ltc2990_V2_+5V
 * brief:	ltc2990 V2
 */
	{
		/* SDR Record Header */
		{
			0x05,	//Record ID 				=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x04,	//Sensor Number 				=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x5,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		391&0xff,	//M_LSB 				=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((391>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent  === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x0,	//Lower Non-Recoverable Threshold
		0x0,	//Lower Critical Threshold
		0x0,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_V2_+5V"
	},
/*
 * sensor number: 5
 * sensor name:	ltc2990_TR2_Temp
 * brief:	ltc2990 TR2
 */
	{
		/* SDR Record Header */
		{
			0x06,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x05,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_TR2_Temp"
	},
/*
 * sensor number: 6
 * sensor name:	Current_+3.3V
 * brief:	adc_ch1, STMC109
 */
	{
		/* SDR Record Header */
		{
			0x07,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x06,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x5,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		55,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x00,	//Lower Non-Recoverable Threshold
		0x00,	//Lower Critical Threshold
		0x00,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"Current_+3.3V"
	},
/*
 * sensor number: 7
 * sensor name:	ltc2991_Temp
 * brief:	ltc2991 internal temperature
 */
	{
		/* SDR Record Header */
		{
			0x08,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x07,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2991_Temp"
	},

/*
 * sensor number: 8
 * sensor name:	ltc2991_VCC
 * brief:	ltc2991 supply
 */
	{
		/* SDR Record Header */
		{
			0x09,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x08,	//Sensor Number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x4,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		195,	//M_LSB  			=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		25,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x3&0x0F),		//R exponent,B exponent === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x00,	//Lower Non-Recoverable Threshold
		0x00,	//Lower Critical Threshold
		0x00,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2991_VCC"
	},
/*
 * sensor number: 9
 * sensor name:	ltc2991_V3_+5V
 * brief:	ltc2991 V3
 */
	{
		/* SDR Record Header */
		{
			0x0A,	//Record ID 				=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x09,	//Sensor Number 				=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x4,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		391&0xff,	//M_LSB 				=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((391>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent  === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x0,	//Lower Non-Recoverable Threshold
		0x0,	//Lower Critical Threshold
		0x0,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2991_V3_+5V"
	},
	
/*
 * sensor number: 10
 * sensor name:	ltc2991_V4_+5V
 * brief:	ltc2991 V4
 */
	{
		/* SDR Record Header */
		{
			0x0B,	//Record ID 				=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x0A,	//Sensor Number 				=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x4,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		391&0xff,	//M_LSB 				=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((391>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(uint8_t)(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent  === !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x0,	//Lower Non-Recoverable Threshold
		0x0,	//Lower Critical Threshold
		0x0,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2990_V4_+5V"
	},
/*
 * sensor number: 11
 * sensor name:	ltc2991_TR3_Temp
 * brief:	ltc2991 TR3
 */
	{
		/* SDR Record Header */
		{
			0x0C,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		11,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2991_TR3_Temp"
	},
/*
 * sensor number: 12
 * sensor name:	ltc2991_TR4_Temp
 * brief:	ltc2991 TR4
 */
	{
		/* SDR Record Header */
		{
			0x0D,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		12,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"ltc2991_TR4_Temp"
	},
/*
 * sensor number: 13
 * sensor name:	LM75A_Temp
 * brief:	
 */
	{
		/* SDR Record Header */
		{
			14,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		13,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"LM75A_Temp"
	},
/*
 * sensor number: 14
 * sensor name:	LM73_Temp
 * brief:	
 */
	{
		/* SDR Record Header */
		{
			15,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		14,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"LM73_Temp"
	},
/*
 * sensor number: 15
 * sensor name:	NST175_Temp
 * brief:	NST175
 */
	{
		/* SDR Record Header */
		{
			16,	//Record ID 			=== !!!!!!!! ===
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		15,	//Sensor number 			=== !!!!!!!! ===
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB 							=== !!!!!!!! ===
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance 	=== !!!!!!!! ===
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent 	=== !!!!!!!! ===
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x1,	//Positive - threshold Hysteresis value
		0x1,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"NST175_Temp"
	}	
};

const CompactSensorRec_T Compact_sdr_tbl[]	=	{
	{0},	//dummy sensor, make compiler happy.	
};