gd32450i-eval/app/bmc/sensor_sdr.c

/*
 * config sensor sdr in here.
 * Author:Jimbo
 */

#include <stdio.h>
#include <stdint.h>
#include "com_IPMI_SDRRecord.h"

/*
 * sdr table
 */
const MgmtCtrlrDevLocator_T bmc_sdr = {
		/* SDR Record Header */
		{
			0x01,	//Record ID
			0x51,	//SDR Version
			MGMT_CTRL_DEV_LOCATOR_SDR_REC,	//Record Type
			11+MAX_ID_STR_LEN,	//Record Length = 11+string length
		},
		/* Record Key Bytes*/            
		0x20,                        /* Slave address - 0x20 Primary BMC */
		0x00,                        /* ChannelNumber - 0x00 Primary BMC */
											
		/* Record Body Bytes*/
		0x0,       /* power state notification         */
		0xff,       /* Device Capablities               */
		{0,    0,   0,},                          /* RESERVED                         */
		0x0,                   /* Entity ID                        */
		0x1,                 /* Entity Instance                  */
		0x0,                      /* OEM                              */
		0xc0 +MAX_ID_STR_LEN,   /* ID String Type / Length Code     */
		"STM32F429_BMC"
	};
 
	
/***************** Attation ************************
* <Record ID>,	<Sensor Number>  must be modified!!!
**************************************************/
	
const FullSensorRec_T full_sdr_tbl[] = {
/*
 * sensor number: 1
 * sensor name:	+12V
 * brief:	ltc4280
 */
	{
		/* SDR Record Header */
		{
			0x02,	//Record ID
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x01,	//Sensor Number
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x4,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		0x3d,	//M_LSB
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0xfd<<4)+(0x0&0x0F),		//R exponent,B exponent
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x00,	//Lower Non-Recoverable Threshold
		0x00,	//Lower Critical Threshold
		0x00,	//Lower Non-Critical threshold
		0x0,	//Positive - threshold Hysteresis value
		0x0,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"+12V"
	},
/*
 * sensor number: 2
 * sensor name:	+12V_Current
 * brief:	ltc4280
 */
	{
		/* SDR Record Header */
		{
			0x03,	//Record ID
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x02,	//Sensor Number
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x02,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x0<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x5,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		/* M = 0x12e x 10^-4 */
		0x2e,	//M_LSB
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x12e>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0xfc<<4)+(0x0&0x0F),		//R exponent,B exponent
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0xff,	//Normal Maximum
		0x00,	//Normal Minimum
		0xff,	//Sensor Maximum Reading
		0x00,	//Sensor Minimum Reading
		0xff,	//Upper Non-Recoverable Threshold
		0xff,	//Upper Critical Threshold
		0xff,	//Upper Non-Critical Threshold
		0x00,	//Lower Non-Recoverable Threshold
		0x00,	//Lower Critical Threshold
		0x00,	//Lower Non-Critical threshold
		0x0,	//Positive - threshold Hysteresis value
		0x0,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"+12V_Current"
	},
	
/*
 * sensor number: 3
 * sensor name:	Temp_Board
 * brief:	G780 local
 */
	{
		/* SDR Record Header */
		{
			0x04,	//Record ID
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x03,	//Sensor Number
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x0,	//Positive - threshold Hysteresis value
		0x0,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"Temp_Board"
	},

	/*
 * sensor number: 4
 * sensor name:	Temp_FPGA
 * brief:	G780 remote
 */
	{
		/* SDR Record Header */
		{
			0x05,	//Record ID
			0x51,	//SDR Version
			FULL_SDR_REC,	//Record Type
			43+MAX_ID_STR_LEN,	//Record Length = 43+string length
		},
		/* Record Key Bytes */
		0x20,	//Sensor Owner ID
		0x0,	//Sensor Owner LUN
		0x04,	//Sensor Number
		/* Record Body Bytes */
		0x7,	//Entity ID
		0x1,	//Entity Instance	
		0x7f,	//Entity Initialization
		0x68,	//Sensor Capabilities
		0x01,	//Sensor Type: 01-temperature, 02-voltage, 03-current, 04-fan
		0x01,	//Event / Reading Type
		0x7a95,	//Lower Threshold Reading Mask
		0x7a95, //Upper Threshold Reading Mask
		0x3f3f,	//Settable / Readable Threshold Mask

		/*
			[7:6] - Analog (numeric) Data Format**
			00b = unsigned
			01b = 1's complement(singed)
			10b = 2's complement(singed)
			11b = Does not return analog (numeric) reading
			[5:3] - Rate unit
			000b = none
			001b = per µS
			010b = per ms
			011b = per s
			100b = per minute
			101b = per hour
			110b = per day
			111b = reserved
			[2:1] - Modifier unit
			00b = none
			01b = Basic Unit / Modifier Unit
			10b = Basic Unit * Modifier Unit
			11b = reserved
			[0] - Percentage 0b = no, 1b = yes
		*/
		(0x2<<6)+(0x0<<3)+(0x0<<1)+0x0,	//Sensor Units 1
		/*
			0 unspecified 
			1 degrees C 
			2 degrees F 
			3 degrees K 
			4 Volts 
			5 Amps
		*/
		0x1,	//Sensor Units 2 - Base Unit
		0x0,	//Sensor Units 3 - Modifier Unit
		0x0,	//Linerization
		0x1,	//M_LSB
		/*
			[7:6] - M: MS 2 bits
			[5:0] - Tolerance: 6 bits, unsigned (Tolerance in +/- ½ raw counts)
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//M,Tolerance
		0x0,	//B_LSB
		/*
			[7:6] - B: MS 2 bits
			Unsigned, 10-bit Basic Sensor Accuracy in 1/100 percent scaled up by unsigned
			Accuracy exponent:
			[5:0] - Accuracy: LS 6 bits
		*/
		((0x0>>2)&0xC0)+(0x0&0x3F),	//B,Accuracy
		((0x0>>2)&0xF0)+(0x0&0x0C)+0x0,	//Accuracy,Accuracy exponent
		(0x0<<4)+(0x0&0x0F),		//R exponent,B exponent
		0x0,	//Analog Characteristics Flags
		0x7f,	//Nominal Reading
		0x7f,	//Normal Maximum
		0x80,	//Normal Minimum
		0x7f,	//Sensor Maximum Reading
		0x80,	//Sensor Minimum Reading
		0x7f,	//Upper Non-Recoverable Threshold
		0x7f,	//Upper Critical Threshold
		0x7f,	//Upper Non-Critical Threshold
		0x80,	//Lower Non-Recoverable Threshold
		0x80,	//Lower Critical Threshold
		0x80,	//Lower Non-Critical threshold
		0x0,	//Positive - threshold Hysteresis value
		0x0,	//Negative - threshold Hysteresis value
		0x0,	//Reserved
		0x0,	//Reserved
		0x0,	//OEM
		0xC0+MAX_ID_STR_LEN,	//ID String Type / Length Code
		"Temp_FPGA"
	},
};

const CompactSensorRec_T Compact_sdr_tbl[]	=	{
	{0},	//dummy sensor, make compiler happy.	
};